Troubleshooting Guide: Canon TS3322 Won’t Connect to WiFi

Introduction

The Canon PIXMA TS3322 is a budget-friendly, all-in-one inkjet printer designed for home and small office use. One of its most convenient features is wireless connectivity, which allows users to print from laptops, smartphones, and tablets without using cables.

However, many users face WiFi connectivity issues while setting up their Canon TS3322 printer. If your ts3322 connect to wifi, this detailed guide will help you diagnose and fix the issue step by step.

Common Reasons Why Your Canon TS3322 Won’t Connect to WiFi

Before jumping into solutions, let’s identify some possible reasons why your printer isn’t connecting:

1. Weak WiFi Signal: The printer may be too far from the router.
2. Wrong WiFi Credentials: Entering an incorrect WiFi password (SSID/Passphrase) will prevent connection.
3. Router Issues: Your router may not be compatible, or its WPS button is disabled.
4. Printer Settings: The printer may be in the wrong connection mode.
5. Firmware Issues: An outdated printer firmware may cause WiFi connectivity problems.
6. Interference: Other electronic devices (microwaves, cordless phones) may be interfering with the WiFi signal.
7. Network Configuration Issues: Your firewall or security settings may be blocking the connection.

Now, let’s explore step-by-step solutions to fix your Canon TS3322 WiFi connection issue.

Solution 1: Restart Your Devices

Before making any changes, try power cycling your devices:

1. Turn off your Canon TS3322 printer.
2. Unplug your WiFi router and wait 30 seconds.
3. Plug the router back in and wait for it to fully restart.
4. Turn on the printer and try reconnecting to WiFi.

If this doesn’t work, move on to the next solution.

Solution 2: Check Your WiFi Network

1. Ensure your router is working by connecting another device (like a phone or laptop) to the WiFi.
2. Check your WiFi signal strength – If it’s weak, move the printer closer to the router.
3. Make sure you’re using a 2.4GHz network – The TS3322 does not support 5GHz WiFi.

Solution 3: Connect the Printer Using WPS Method

If your router supports Wi-Fi Protected Setup (WPS), follow these steps:

1. Turn on your Canon TS3322 printer.
2. Press and hold the WiFi button until the WiFi light starts flashing.
3. Within 2 minutes, press the WPS button on your router.
4. Wait for the printer to connect (the WiFi light will stop blinking and become solid).

Note: If the WPS method does not work, proceed to the manual setup method.

Solution 4: Connect the Printer Using Manual Setup

If WPS fails, follow these manual setup steps:

For Smartphones (Using Canon PRINT Inkjet/SELPHY App)

1. Download the Canon PRINT Inkjet/SELPHY app on your phone (Available for iOS and Android).
2. Turn on the printer and press the WiFi button until the indicator blinks.
3. Open the Canon PRINT app and tap Add Printer → Connect via WiFi.
4. Select your WiFi network and enter the WiFi password.
5. Follow on-screen instructions to complete the setup.

For Windows PC or Mac

1. Download the Canon TS3322 driver from the Canon support website.
2. Run the installation wizard and select Wireless Setup.
3. Follow on-screen instructions to select your WiFi network and enter the WiFi password.
4. Once the connection is established, print a test page.

Solution 5: Reset Your Printer’s Network Settings

If your TS3322 is still not connecting, reset its network settings and try reconnecting.

How to Reset the Printer’s WiFi Settings

1. Turn on the printer.
2. Hold the Stop button for about 10 seconds until the power light blinks.
3. The printer will reset its WiFi settings.

After resetting, try reconnecting using the WPS or manual setup methods mentioned above.

Solution 6: Check Your Router Settings

Sometimes, router settings can block your printer from connecting.

Steps to Fix Router Issues

1. Disable MAC address filtering – Some routers block new devices.
2. Enable 2.4GHz WiFi – The Canon TS3322 doesn’t support 5GHz.
3. Restart the router – Power cycle your router to refresh settings.
4. Check firewall settings – Some security settings can block new connections.

If you’re unsure how to change router settings, check the router manual or contact your internet service provider (ISP).

Solution 7: Update Your Printer Firmware

An outdated firmware can cause WiFi connection issues.

How to Update Canon TS3322 Firmware

1. Visit the Canon website and enter TS3322 in the search bar.
2. Download the latest firmware update for your printer model.
3. Follow on-screen instructions to install the update.

Solution 8: Connect Your Printer Without a Router (Direct Connection)

If you don’t have access to a WiFi network, you can use Direct Connect Mode:

1. Enable Direct Connect Mode on your printer by pressing the Direct button until the WiFi light starts flashing.
2. On your phone or laptop, go to WiFi settings and connect to the network "Canon_ij_XXXX".
3. Open the Canon PRINT Inkjet/SELPHY app and select the printer to print wirelessly.

Solution 9: Reinstall Printer Drivers (For Windows & Mac)

If your printer is not detected after WiFi setup, reinstall the drivers:

For Windows Users

1. Open Control Panel → Devices and Printers.
2. Find the Canon TS3322 printer, right-click, and select Remove device.
3. Download and install the latest Canon TS3322 driver from the Canon support page.

For Mac Users

1. Go to System Preferences → Printers & Scanners.
2. Select the Canon TS3322 printer and click the minus (-) button to remove it.
3. Download and install the latest driver from Canon’s website.

Final Thoughts

If your Canon TS3322 printer won’t connect to WiFi, it can be frustrating, but these troubleshooting steps should help resolve the issue.

Quick Recap:

✔ Restart your printer and router.
✔ Check your WiFi network and credentials.
✔ Use the WPS or Manual Setup method.
✔ Reset the printer’s network settings if needed.
✔ Ensure your router is set to 2.4GHz WiFi.
✔ Update your printer’s firmware and reinstall drivers.
✔ Try Direct Connect Mode if needed.

If none of these solutions work, you may need to contact Canon Support for further assistance.

By following this guide, you should be able to connect your Canon TS3322 printer to WiFi successfully and enjoy wireless printing!