How to Connect RangeXTD WiFi Extender to Orbi AX5400

If you're trying to connect your RangeXTD WiFi Extender to the Orbi AX5400 router, this guide will walk you through the entire rangextd setup process. You can choose either the WPS method or the manual setup method, depending on your router's features.

Method 1: Using the WPS Button

The WPS method is the simplest way to perform a rangextd setup, as it requires just the push of a button. Follow these steps:

1. Plug in your RangeXTD extender close to the Orbi AX5400 router and power on both devices.

2. Press and hold the WPS button on your Orbi router, then press the WPS button on the RangeXTD extender within a few seconds.

3. Wait a couple of minutes for the devices to pair and complete the rangextd setup.

4. Once connected, your extender will automatically adopt the router’s existing settings.

Note: If your router doesn't support WPS, you’ll need to use the manual method described below.

Method 2: Manual Setup via Web Interface

For routers without a WPS button, you can perform the rangextd setup manually through the extender’s web interface:

1. Use an Ethernet cable to connect your computer to the RangeXTD extender.

2. Open a web browser and enter 192.168.7.250 in the address bar to access the login page.

3. Use the default credentials for the rangextd login.

4. After a successful rangextd login, the setup interface will appear.

5. Click on WiFi Range Extender, then choose the network (SSID) you'd like to extend.

6. Enter your WiFi password and click Apply to finish the setup.

Once the rangextd setup is complete, move the extender to an area where your WiFi signal is weak. This will help maximize coverage and eliminate dead zones.

Let me know if you’d like a shorter version for quick reference or optimized for a specific platform like a blog, FAQ page, or product manual!